MENU

Intelligent light sensor improves design flexibility for display and non-display applications

Intelligent light sensor improves design flexibility for display and non-display applications

New Products |
By eeNews Europe



Designs using lower-sensitivity light sensors face constraints and are forced to meet tight specifications governing the properties of the attenuating material they are placed behind, the physical placement of the sensor, and the minimum intensity of light it must be exposed to in order to deliver sufficiently accurate measurements. With the introduction of the TSL2591 device family, designers now have available to them greater flexibility in system design and layout. Its high sensitivity and wide dynamic range mean that it can deliver accurate measurements even under very low light conditions. This gives the designer the freedom to place the sensor away from the direct path of the light it is measuring and behind a wider variety of darkened glass or attenuating materials.

For display applications, the light sensor TSL2591 device family utilizes an ams dual-photodiode architecture that provides accurate ambient light measurements even when placed behind material attenuating as much as 99% of the visible light while automatically compensating for the increased IR component. This enables a photopic response to ambient light intensity that mimics the human eye. Its high sensitivity reduces or eliminates design concerns for smartphone and tablet displays in which inked glass variations can result in costly design alterations to accommodate less sensitive devices. The TSL2591 can be placed deeper within the end product, providing more efficient and lower-cost solutions which offer the product designer more flexibility from a system design perspective. It also provides for a sleek, seamless industrial design with no unsightly apertures or voids in inked glass.

In addition, the TSL2591 device family provides an interrupt feature that simplifies and improves system efficiency by eliminating the need to poll a sensor for a light intensity value. The primary purpose of the interrupt function is to detect a meaningful change in light intensity. Meaningful change can be defined by the user in terms of light intensity and time, or the persistence of a change in intensity. TSL2591 is an integrated light-to-digital sensor with dual analog-to-digital converters and an I2C interface. It offers programmable gain and programmable integration time.

The TSL25911FN (Vbus=Vdd=3.3V) and the TSL25913FN (Vbus=1.8V) ultra-high sensitivity light sensors are available now. They are priced at $0.83 for 1,000 pieces.

For further information visit 
www.ams.com/Light-to-Digital/TSL2591.

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s