IoT cloud development kit is Wi-Fi and BT/BLE-ready
Wireless connectivity is supported by the Murata 1DX module, which is powered by the Cypress CYW4343W Wi-Fi and BT/BLE combo SoC.
The SoC includes a 2.4 GHz WLAN IEEE 802.11 b/g/n baseband/radio and Bluetooth 4.2 support. In addition, it integrates a high-performance power amplifier (PA), a low-noise amplifier (LNA) for best-in-class receiver sensitivity, and an internal transmit/receive (iTR) RF switch, further reducing the overall system cost and 1DX module size.
The Nebula board supports applications development through the Cypress WICED (Wireless Internet Connectivity for Embedded Devices) Studio development platform.
Nebula is equipped with 4 different interfaces to access the STM32F429 peripherals to enable developers to create any IoT application: Arduino™ compatible shield, mikroBUS™ socket, Pmod™ connector/9nterface and USB. In addition, the Nebula board employs easy hardware expandability through a large number of standardized add-on boards. Each one focuses on a different application such as motor control and environmental sensors, including the wireless connectivity to enable IoT development. These will also be available to purchase from Future Electronics.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
