MENU

IP67 wire-to-wire and wire-to-board connectors

IP67 wire-to-wire and wire-to-board connectors

New Products |
By Julien Happich



Featuring double latches that providing a tactile double ‘click’ when fully mated, the E-Seal 560 Series connectors are exceptionally resilient to vibration. The devices offer 2, 3 or 5 contacts in wire-to-wire and wire-to-board variants. The seals, which are pre-assembled within the housings, are available to accommodate 1.0 to 1.3mm and 1.3 to 1.7mm wire thickness. The connectors feature a 2.5mm pin pitch and a current rating of 3A, 250VAC, with an operating temperature range of between -40º and +105º C. Electrical integrity is ensured by internal polarisation, eliminating the possibility of mis-mating the connectors. Wire termination is made with crimp ‘poke home’contacts. A waterproof cap seals any unused contact positions. 

Also featuring the same ‘peace of mind’ double latching as the as the 560 Series, EDAC’s E-Seal 572 Series connectors offer 1, 2 or 3 contacts with wire-to-wire and wire-to-board variants. Wire seals, which are assembled onto each wire when crimping the contacts to the cable, are available in a choice of 4 colour coded sizes to accommodate wire diameters from 1.7mm to 3.1mm. 572 Series connectors offer a 5.8mm pitch and a current rating of 10A at 300V AC and are rated for operation within the -40º to +105º C temperature range. Internal polarisation ensures electrical integrity. 

EDAC supports its E-Seal connector customers with a range of application tooling, including hand crimping tools applicators and contact removal tooling.

Visit EDAC Europe at www.edac.net

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s