ISO 15693 compliant HF-band RFID tags measure only 3.2×3.2×0.7mm
Compliant with ISO 15693 standard, the tag can be used with any reader / writer that conforms to the same standard. The tag is suitable for use in most operating environments including high temperature and high humidity so it suits a wide range of appliance and object tracking, certification and authentication applications.
Normally, an RFID device requires an antenna and the IC tag and due to the frequencies involved the antenna tends to become extremely large. However, by applying multi-layer circuit board and high-frequency module techniques, Murata has been able to incorporate the antenna within the ceramic substrate. Using this approach, the LXMS33HCNG tag is extremely resistant to environmental conditional and is highly stable in operation. Read range, when used with a 200mW reader/writer is typically 15mm.
Visit Murata Europe at www.murata.eu
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
