LED driver enables data transfer via mains cable

LED driver enables data transfer via mains cable

New Products |
Tridonic's PREMIUM TALEXXdriver LED driver series has been designed to offer a high degree of flexibility and features the digital ready2mains interface which uses the existing mains cable for data transfer.
By eeNews Europe

Share:

Different casing versions and output classes with application-optimized operating ranges make the LED drivers ideal for a wide range of professional LED solutions.

Luminaire manufacturers, electrical contractors and potential users will all benefit from the features of the LED Driver series. TALEXXdrivers in the PREMIUM series
can adapt to different lighting requirements with a high degree of flexibility either via the familiar one4all interface or via the digital ready2mains communications

interface. This new interface enables digital data, such as configuration parameters, to be transferred directly by means of the mains cable. Upgrading an existing non-dimmable luminaire installation to the latest dimmable LED generation is made easier with ready2mains as there is no need for any new cabling in the ceiling.

Thanks to ready2mains it is now easy to configure control gear with manually settable output current and integrate it in existing test equipment. The advantages over the old method of setting the current manually are obvious. Data transfer is rapid and much less susceptible to error because no manual operations are required at all.

Simple integration in automated workflows results in huge potential cost savings in the production of LED luminaires. Nevertheless, TALEXXdrivers in the PREMIUM series can still be programmed via the DALI interface and manual resistance plugs can still be used.

A choice of compact casing designs – C, SR and SC – means that the most appropriate can be used for each type of luminaire. Linear low-profile (lp) designs are ideal efficiency-based office applications. Thanks to their dynamic operating ranges the devices cover the entire output spectrum with maximum efficiency.

The one4all interface continues to be available and adds DALI, DSI, switchDIM and corridorFUNCTION functionality. Other features include a significant increase in
efficiency, low standby losses and reduced dimensions.

The first three products in the PREMIUM series are linear low-profile devices:

LCA 50 W 100-400 mA one4all lp PRE
LCA 75 W 100-400 mA one4all lp PRE
LCA 100 W 250-700 mA one4all lp PRE

www.tridonic.com

Linked Articles
eeNews Europe
10s