LEDs spot quantum dots to produce high-performance nanophotonic devices
A quantum dot should produce one and only one photon — the smallest constituent of light — each time it is energized, and this characteristic makes it attractive for use in various quantum technologies, such as secure communications.
While they appear randomly, in order for the dots to be useful they need to be located in a precise relation to some other photonic structure, be it a grating, resonator or waveguide, which will enable control of the photons that the quantum dot generates. Finding the quantum dots — which are about 10 nm across — is not easy.
The researchers have developed a simple new technique for locating quantum dots to create high-performance single photon sources.
The development, which is published in Nature Communications, aims to make the manufacture of high-performance photonic devices using quantum dots much more efficient. The devices are usually made in regular arrays using standard nanofabrication techniques like electron-beam lithography and semiconductor etching. However because of the random distribution of the dots, only a small percentage of them will line up correctly, at the optimum position within the device. The overall process produces few working devices.
“This is a first step towards providing accurate location information for the manufacture of high performance quantum dot devices,” said NIST physicist Kartik Srinivasan. “So far, the general approach has been statistical – make a lot of devices and end up with a small fraction that work – but our camera-based imaging technique instead seeks to map the location of the quantum dots first, and then uses that knowledge to build optimized light-control devices in the right place.”
“This new technique is sort of a twist on a red-eye reducing camera flash, where the first flash causes the subject’s pupils to close and the second illuminates the scene,” said Dr Luca Sapienza, from the University of Southampton’s Quantum Light and Matter group.
In their setup, instead of xenon-powered flash the team used two LEDs. One LED activates the quantum dots when it flashes. At the same time, a second, different color LED flash illuminates metallic orientation marks placed on the surface of the semiconductor wafer the dots are embedded in. Then a sensitive camera snaps a 100-micrometer by 100-micrometer picture.
By cross-referencing the glowing dots with the orientation marks, the researchers can determine the dots’ locations with an uncertainty of less than 30 nm. The coordinates in hand, scientists can then tell the computer-controlled electron beam lithography tool to place any structure the application calls for in its proper relation to the quantum dots, resulting in many more usable devices.
Using the technique, the researchers demonstrated grating-based single photon sources in which they were able to collect 50 per cent of the quantum dot’s emitted photons, the theoretical limit for this type of structure.
The researchers also demonstrated that more than 99 per cent of the light produced from their source came out as single photons. Such high purity is partly due to the fact that the location technique helps the researchers to quickly survey the wafer (10,000 square micrometers at a time) to find regions where the quantum dot density is especially low–only about one per 1,000 square micrometers which makes it far more likely that each grating device contains one — and only one — quantum dot.
L. Sapienza, M. Davanço, A. Badolato and K. Srinivasan. Nanoscale optical positioning of single quantum dots for bright and pure single-photon emission. Nature Communications, 6, 7833 doi:10.1038/ncomms8833. Published 27 July 2015.
Related articles and links: