MENU

Lock-in amplifier/AWG comes with pulse counter

Lock-in amplifier/AWG comes with pulse counter

New Products |
By Julien Happich



The Pulse Counter can be used in four different modes: In free-running mode, the counter is activated by a configurable timer, and after the acquisition, it is reset and restarted. The total number of counts recorded in each sequence is transferred after the acquisition. In gated-mode, the counter is activated on a rising edge and deactivated on a falling edge. On the falling edge, the number of pulses is transferred. The gated-free-running mode is a combination of the previous two modes. Time-tagging mode records each event with a timestamp and transfers to the PC. For fast data transfer to the host PC, USB 2.0 and Ethernet 1GbE connections are included.

The LabOne user interface enables swift and straightforward data handling. This feature-rich toolset is further strengthened with a histogram, oscilloscope with a sampling rate of 1.8 GSa/s, FFT spectrum analyzer and a threshold Unit. The available APIs for LabView, MATLAB, Python, C/C++ and .NET allow simple interfacing with other programs.

Zurich Instruments – www.zhinst.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s