Low-cost speed sensors target industrial applications
The modular system uses differential hall-chip sensor devices with a standard and fully-integrated magnetic circuit. The results are high quality engineered sensor products with a simple design that deliver a cost-effective very high performance device which can sense up to 20,000 rpm. Electrical connection to the sensors is possible via 2-wire, 3-wire, or 4-wire interfaces.
The components can be connected via output leads or a plug-in connector. The cylindrical housing is available with diameters starting from 13mm and with a length from 20mm up to 80mm. The mounting flange with screw offers a high degree of flexibility in regards of position, angle and alignment of the sensor.
The speed sensors have an operating temperature range from -40 up to +150°C and the housing meets at least IP67 specifications. The sensors will operate from a DC supply in the range of 4.5 to 24V and are protected against overvoltage and reverse voltage connection.
Visit Cherry at www.cherryswitches.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
