Low-noise charge pump saves space, minimizes EMI
The LTC3246 uses multimode switched capacitor conversion to maintain regulation over a wide 2.7V to 38V input voltage range and produces a regulated 3.3V, 5V, or externally adjustable (2.5V to 5V) output. Internal circuitry automatically selects a conversion ratio of 2:1, 1:1 or 1:2 to optimize efficiency as input voltage and load conditions vary.
The LTC3246’s switched capacitor architecture with inherent soft switching provides lower radiated noise and EMI compared with conventional switching regulators. Timing control for the reset timeout and the windowed watchdog timeout can be adjusted using external capacitors on the RT and WT pins, or fixed internally via pin strapping. The accurate threshold of the reset input can be used for additional supply monitoring, or can be configured as a pushbutton reset. Other features include stability with ceramic capacitors, foldback current limiting to prevent excessive current flow during start-up, plus short-circuit and thermal protection.
The LTC3246 is available in a compact, thermally enhanced 16-lead MSOP package. The E and I grades feature a –40°C to 125°C operating junction temperature, the H grade has a –40°C to 150°C operating junction temperature, and the MP grade is specified for –55°C to 150°C operation. 1000-piece pricing starts at $3.25 each for the E grade and all devices are available from stock.
More information: www.linear.com/product/LTC3246
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
