Low-power micro camera module is only 1mm2
Interface Mode (SEIM). Like a standard Serial Peripheral Interface (SPI), the SEIM channel is easy to implement in any host processor and provides a cost-optimized solution without the need for LVDS deserialization. The maximum frame rate over the SEIM interface is 58 frames/s at a clock rate of 75MHz.
The camera features a custom multi-element lens which greatly improves the effective resolution of the sensor and reduces distortion compared to competing sensors that have a single-element lens. The MTF (Modulation Transfer Function) is over 50% in the corners, distortion is under 15% and colour aberration is under 1Px.
The slave configuration in SEIM enables control of the frame rate via the host application processor, down to rates of a single frame per second or even slower. Two or more cameras can be synchronized for applications such as eye tracking or stereo vision, by providing a centralized clock from the application processor.
The NanEyeM also offers an Idle mode which reduces power consumption in applications, such as presence detection, that require only a small number of frames per minute.
ams – www.ams.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
