Low profile back flip FPC connector in a 0.2mm pitch

Low profile back flip FPC connector in a 0.2mm pitch

New Products |
By Julien Happich

Designed in a compact form factor, only 0.65mm high with a fine pitch of 0.2mm to minimize the required mounting area, the 0.2A-rated connector series offers excellent impedance characteristics, and delivers high-density transmission required to support Embedded DisplayPort ver1.3 and MIPI D-PHY ver1.1 standards. 

The connector has a short mounted depth of 3.2mm. Two multi-functional metal fittings are incorporated into the connector housing to support correct tabbed FPC insertion/withdrawal and to hold the FPC in place temporarily before the locking operation. A firm and tactile click confirms correct locking of the FPC has been achieved. When locked the metal fittings close to hold the FPC tabs firmly in place to ensure high retention of the FPC. The unique contact design features a sharp protrusion in the bottom section that presses up into the FPC stiffener to increase the retention force to 9.9N in the horizontal direction. In addition, each contact and metal fitting support the actuator axle during rotation to hold the actuator securely in place.

Visit Hirose Electric at  

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles