Low-profile controller card has 4 gigabit PoE ports
The controller card is tailored for typical use in PoE applications, for example automatic optical inspection (AOI), factory automation or IP monitoring, e.g. in traffic areas or for access controls.
The card’s core is its gigabit Ethernet controller I350-AM44 from Intel with four RJ45 connections. All four Ethernet interfaces support 802.3at PoE+ and each provide up to 25.5 watts’ output up to a maximum of 75W total output (restricted due to the PCIe bus). The option to release the voltage for each of the four connections individually in case of interruption or error reset is provided via an API. 9.5 kB Jumbo Frames, Teaming and the Precision Time Protocol (PTP) are supported in accordance with IEEE 1588. The sturdy overvoltage protection in accordance with IEC 61000-4-5 class 2 withstands overvoltage of up to 1kV and 8kV ESD on the signal lines. This means that the card can also be used outdoors, for example for video monitoring or in production environments where overvoltage via the network can result in serious damages.
Acceed – www.acceed.net
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
