MENU

Medical wall mount power supplies meet level VI and Tier 2 standards

Medical wall mount power supplies meet level VI and Tier 2 standards

New Products |
By Julien Happich



With single outputs of 6W and 18W respectively, they feature a high average efficiency of up to 87.5% typical measured at 25%, 50%, 75% and 100% load, meeting the new DoE energy efficiency level VI (US) and CoC Tier 2 requirements in the EU. Both series feature a low no load input power, with all ranges consuming less than 0.075W.
The ACM06 series is available in 5, 9 and 12VDC output models, while the ACM18 comes in 5, 9, 12, 15, 18 and 24VDC single output models, the most common output voltages to suit most applications. Both offer a choice of detachable input plugs for either the US, UK, EU, China or Australian use. This gives the designer the option of sourcing one or multiple plugs for their specific locations.
With Medical 60601-1 and ITE 60950-1 safety approvals, and meeting Class B limits for both conducted and radiated emissions, the power supplies have the relevant international safety approvals and meet stringent EMC noise requirements for use in both medical and industrial applications. An operating temperature range from 0 to +60 degrees C, and a full power rating to +40 degrees C allow the power supplies to operate in most environments.
Both series feature an output cable with a standard, 2.5mm inner, 5.5mm outer diameter barrel connector. 5VDC models are also available with an optional USB in-body connector instead of the output cord and plug. 
Visit XP Power at www.xppower.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s