MENU

Mentor extends rigid-flex & high-speed PCB design in Xpedition

Mentor extends rigid-flex & high-speed PCB design in Xpedition

New Products |
By Graham Prophet



Flex and rigid-flex PCBs, mentor comments, are now found in all types of electronics products, from small consumer devices to aerospace, defence and automotive electronics. The Xpedition rigid-flex technology enables a streamlined design process from initial stack-up creation through manufacturing.

 

Engineers can design complex rigid and flex PCBs in a fully supported 3D environment (3D design and verification—not just a 3D view), resulting in a correct-by-construction methodology for optimum reliability and product quality. 3D verification ensures that bends are in the right position, and elements on the board do not interfere with folding; this can be reviewed early in the design stage to prevent costly redesigns. Users can then export a 3D solid model to MCAD for efficient bi-directional PCB-enclosure co-design.

Integration with Mentor’s HyperLynx high-speed analysis technology enables optimization of signal and power integrity across complex rigid-flex stack-up structures. For fabrication preparation, the Xpedition flow provides all flex and rigid information using the ODB++ common data format. This methodology eliminates data ambiguities by clearly communicating the finished board intent to the fabricator.

 

“Mentor’s Xpedition flow provides multiple board outlines, stack-ups, and bend areas which allow us to define a rigid flex within the design environment, and export a folded 3D step model for efficient mechanical design integration,” stated Charles Ietswaard, PCB design engineer at NIKHEF, the national institute for sub-atomic physics in The Netherlands. “The automated rigid-flex capabilities in Xpedition help us manage the growing complexities of today’s advanced PCB systems.”

 

For efficient rigid-flex development, key features and capabilities include:

– Definition of the rigid-flex stack-up with unique outlines for each region, enabling simpler design changes than stack-up by zone. Standard flex materials (e.g. laminates, ‘embedded’ or ‘bikini’ cover layers, stiffeners, adhesives, etc.) can be included in the stack-up.

– Full support of flex bends to manage where and how the PCB bends, including parts placement on flex layers, flex routing, plane shape fills, tear drops and trace drops. Once bends are defined, the design can be viewed and validated in 3D to ensure there are no collisions.

– Powerful user interface with intuitive and simple selection controls to properly manage the design.

– Electrical rule checking (ERC) using a customizable local rules checker and a comprehensive set of post-design checks for first-pass success.

– Flex-aware signal and power integrity analysis, enabling accurate modelling of interconnect as it passes through different stack-up regions.

– Design for manufacturing (DFM) validation and new product introduction (NPI) tools to ensure seamless PCB design to fabrication management and efficiency.

 

Automated layout for high-speed designs; this Xpedition release also features advanced layout automation to address increasing complexity in high-speed designs and emerging guidelines for high-end computing chip-sets, inlcuding;

– Tabbed routing, an interconnect geometry used to minimize crosstalk and impedance discontinuities, can be created and modified on high-speed traces.

– Designers can create and modify a routing strategy with sketch plans that define a path for trunks of nets, including trace shielding.

– Enhanced tuning enables better feedback and control during interactive editing to achieve high-speed constraints.

– Nets which require back drilling can be defined in layout and output for manufacturing.

– Engineers can import Polar stack-ups and layer mapping directly into the constraint manager to simplify design start-up.

– A new user interface enables review of all design rule checks in the design for quick identification and resolution of electrical and manufacturing design violations.

 

Mentor Graphics; www.mentor.com/pcb/xpedition/pcb-layout/

 

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s