Microslide linear actuator capable of 15 microns / step for up to 64mm
The microslide is approximately 22mm wide by 25.2mm high and is capable of up to a 64mm maximum stroke length. A lightweight anodized aluminium base plate houses the lead screw bushing and is rigidly attached to the aluminium motor mounting plate. At the heart of the slide is the Haydon 15000 Series 15mm can-stack motor, which has been proven in thousands of linear motion applications. The LS15 stepper motor requires no complicated controls and can be commanded using a simple pulse and direction signal. The slide load carriage is made from self-lubricating polyacetal and features a built-in clearance take-up mechanism for load rigidity during motion. The carriage is supported by stainless steel guide rods coated with Black Ice TFE coating. The Kerk leadscrew is 303 stainless steel and is available in 5 different leads including 0.3mm, 0.4mm, 0.5mm, 1.0mm and 2.0mm. When combined with the LS15 stepper motor, very fine positioning resolution can be achieved with the microscrew.
Visit Haydon Kerk Motion Solutions at www.HaydonKerk.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
