MENU

MIPI 2:1 Switch offers cost-effective support for multi-camera devices

MIPI 2:1 Switch offers cost-effective support for multi-camera devices

New Products |
By Julien Happich



The PI3WVR626 provides 2-to-1 multiplexing via three differential channels, each able to switch high speed (HS) and low power (LP) MIPI signals. The device supports D-PHY through two data lanes and a clock lane, along with two lanes for C-PHY.
Each channel is switched using low on-resistance single-pole double-throw (SPDT) switches, which ensures low insertion loss with a break-before-make operation. The high bandwidth of 4.5GHz, coupled with low channel-to-channel skew and minimal crosstalk, means that data rates of 2.5Gsps for C-PHY operation and 3Gbps for D-PHY data can be supported. The PI3WVR626 can operate from a supply voltage of between 1.5V and 3.6V. The PI3WVR626 is offered in the X1-QFN2525-24 package.
Diodes – www.diodes.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s