Modbus Gateway integrated into wireless sensor system
The Deeter Wireless Modbus Gateway communicates with the Modbus network via a RS485 port in slave mode; it coordinates the wireless sensor network and manages data acquisition from the sensors using the IEEE 802.15.4™ wireless protocol in the 2.4 GHz ISM frequency band.
A Deeter Wireless Modbus Gateway may be installed as a component of a new control or measurement system or as an extension to an existing wired sensor system in order to add wireless connected sensors.
Deeter Wireless products may be used indoors or outside and all are rated to IP64, have an operating temperature range of -20 ºC to +70 ºC and compliant to FCC part 15.
The Deeter Group’s comprehensive range of wireless sensors and network components may be used to remotely monitor temperature, pressure, flow, humidity, liquid level, float or proximity switches or any sensor connected to a 4-20-mA control loop. Deeter wireless sensor networks are very versatile and can range from a simple single sensor measurement to complex multi sensor and multi-vendor systems with mixed sensor inputs and routers to extend wireless range and offer self-healing mesh networks.
For further information: www.deeter.co.uk.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
