Mouser offering Cypress’ PSoC 6 WiFi-BT Pioneer Kit
The kit includes a PSoC 6 WiFi-BT Pioneer board, TFT display shield, necessary jumper wires, and a USB cable. The Pioneer board has a header that makes it compatible with Arduino UNO shields and Digilent Pmod modules with operating voltages from 1.8V to 3.3V. A programmer and debugger is also on-board that supports mass storage programming and custom applications support, as well as 512 Mbits of NOR flash. The board also features a five-segment slider, two buttons, and one proximity sensing header for evaluation of Cypress’ CapSense capacitive-sensing technology. The TFT display shield has a 2.4-inch module, six-axis motion sensor, ambient light sensor IC, and PDM microphone.
The PSoC 62 MCU, which will also be available from Mouser soon, delivers ultra-low-power performance with the critical security features. It integrates an Arm Cortex-M4 core and Arm Cortex-M0+ core, 1 MByte of flash, 288 Kbytes of SRAM, and 104 general-purpose inputs and outputs (GPIO). The board also offers a USB Type-C power delivery system, plus a Murata LBEE5KL1DX module for 2.4-GHz WLAN and Bluetooth functionalities.
More information
www.mouser.com/cypress-psoc-6-soc
Related news
PSoC 6 MCU powers innovative Oura smart ring
Wireless sensor network development platform available from Digi-Key
Design kit supports Cypress’ PSoC 6 programmable devices for Bluetooth
STM32 Software Development Kit facilitates motor-control design
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :