Networked self-analyzing electric motors offer continuous monitoring solution
By transforming the motor itself into a sensor, the team led by Professor Matthias Nienhaus are creating smart motors that can tell whether they are still running smoothly, can communicate and interact with other motors and can be efficiently controlled.
The engineers are teaching the drive how to make use of the data and are currently working with project partners to study and test a number of different procedural methods. The ultimate goal is to make manufacturing processes more cost-effective and flexible and to enable machinery and equipment to be continuously monitored for faults or signs of wear.
The drive systems specialist Professor Matthias Nienhaus from Saarland University is working on developing a new kind of self-monitoring motor – one that does not need sensors.
“We’re developing an important new type of sensor: the motor itself,” said Professor Nienhaus. “The advantage of this new approach is that the engineers simply collect data that is available from the normal operation of the motor. That makes our approach very cost-effective as there’s no need to install any additional sensors. We’re looking at elegant ways of extracting data from the motor and of using this data for motor control and for monitoring and managing processes. We are also working with project partners on improving the design and construction of miniature motors so that they yield the greatest possible quantity of operational information.”
Just like a doctor uses blood test data to draw conclusions about the health patient, Professor Nienhaus and his team use motor data to determine the health of a drive system. “We examine how our measured data correlates with specific motor states and how specific measured quantities change when the motor is not operating as it should,” said Professor Nienhaus.
Gathering data from the motor while it is operating normally is valuable for the research team; the more motor data they have, the more efficiently they can control the motor. The engineers analyze the huge amount of motor data in order to identify those signal patterns that can be used to infer something about the current status of the motor or to flag up changes arising from a malfunction or from wear. The team is developing mathematical models that simulate the various motor states, fault levels and degrees of wear.
The results are fed into a microcontroller, the brain of the system in which the data are processed. If a certain signal changes, the controller can identify the underlying fault or error and respond accordingly. The ‘sentient’ motors can be linked together via a network operating system to form an integrated complex that open up numerous opportunities in the fields of maintenance, quality assurance and production. It is also conceivable that a system could be designed in which one motor automatically takes over if one of the other motors fails.
In order to gather data from the motor, Professor Nienhaus and his team carefully monitor the precise distribution of the magnetic field strength in the motor. An electromagnetic field is generated when electric current flows through the coils located within the outer ring of rotating permanent magnets. The researchers record how this magnetic field changes when the motor rotates. The data can then be used to compute the position of the rotor and to draw other inferences about the status of the motor, which allows the motor to be controlled efficiently and error states to be detected reliably.
Professor Nienhaus is currently testing a number of different methodologies to determine those best suited to acquiring data from the motor. This work is being carried out as part of the project ‘Modular sensor systems for real-time process control and smart state monitoring’ (MoSeS-Pro), whose members include companies such as Bosch, Festo, Sensitec, Pollmeier, CANWAY and Lenord, Bauer & Co. The research team is looking to identify which motor speed range generates the best data and which type of motor is best suited for this type of application. The MoSe-Pro project is being funded by Germany’s Federal Ministry of Education and Research (BMBF).
The project will be on show at Hannover Messe from April 25th to April 29th, 2016 where the team will be exhibiting at the Saarland Research and Innovation Stand in Hall 2, Stand B46.
Related articles and links:
www.uni-saarland.de/en/home.html
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
