netX based communication module is CC-Link compliant
New Products
|
By
eeNews Europe
The design is leaving out the CC-Link ASIC MFP3 and the complete solution is based on the multi-protocol chip netX10. The number of occupied stations, extension cycles as well as Baud Rate and I/O data is freely configurable in accordance with the CC-Link version 2.0 specification. Users benefit from a pre-certified CC-Link interface and can conduct a reduced device test during the certification of the complete application.
Visit Hilscher Gesellschaft für Systemautomation at www.hilscher.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
