New RF switches lay the groundwork for 6G

New RF switches lay the groundwork for 6G

Technology News |
By Rich Pell

The researchers demonstrated new RF switches – devices that are responsible for keeping devices connected by jumping between networks and frequencies while receiving data. In contrast with the switches present in most electronics today, these new devices are made of two-dimensional materials that take significantly less energy to operate, which means more speed and better battery life for the device.

“Anything that is battery-operated and needs to access the cloud or the 5G and eventually 6G network, these switches can provide those low-energy, high-speed functions,” says Deji Akinwande, professor in the Cockrell School of Engineering’s Department of Electrical and Computer Engineering and the principal leader of the project.

Because of the increased demand for speed and power, 6G devices will probably have hundreds of switches in them, many more than the electronics currently on the market. To reach increased speeds, 6G devices will have to access higher frequency spectrum bands than today’s electronics, and these switches are key to achieving that, say the researchers.

Making these switches – and other components – more efficient is another important part of “cracking the code” for 6G, say the researchers. That efficiency goes beyond battery life. Because the potential uses for 6G are so vast, including driverless cars and smart cities, every device will need to virtually eliminate latency.

Akinwande, who previously developed switches for 5G devices, says one of the main differences this time is the materials used. The new switches use molybdenum disulfide – also known as MOS2 – stuck between two electrodes.

These types of devices, called memristors, are typically used for memory. But the adaptation to use these as switches, say the researchers, opens potential for devices, both current and future, to hit new standards of speed and battery life.

The next generation of wireless will be infused with technologies that have come of age during the past decade: ubiquitous sensing, augmented reality, machine learning and the ability to use higher frequency spectrum at mmWave and THz bands. Each wireless generation lasts about a decade, say the researchers, and since the 5G rollout began in 2020, 6G deployment isn’t likely to happen until around 2030 – but the time is now to put all the necessary building blocks in place.

“For the technology to be deployed by 2030,” says Akinwande, “a lot of the components, a lot of the architecture needs to be resolved years in advance so that system-level integration and execution can happen in time for the rollout.”

The next step in this project is to integrate the switches with silicon chips and circuits. The researchers say they are looking at improving how well the switches can jump between frequencies, which would give devices better connections on the go. They are pursuing collaborations with industry partners on developing the switches for commercial adoption.

For more, see “Monolayer molybdenum disulfide switches for 6G communication systems.”

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles