Nordic and Ingy bring IoT networking to smart lighting

Nordic and Ingy bring IoT networking to smart lighting

Business news |
By Wisse Hettinga

Ingy, an Amsterdam, Netherlands-based lighting control start-up, has selected Nordic’s nRF52832 System-on-Chip (SoC) as the hardware to host its ‘Ingy’ proprietary smart lighting firmware. The firmware is preloaded on the nRF52832 SoC-based Fujitsu’s FWM7BLZ20, a module suitable for integration into third-party luminaires designed for commercial and industrial smart lighting installations.

The Ingy smart lighting system employs proprietary firmware to deliver a high bandwidth, low latency, scalable mesh network comprising in excess of 10,000 nodes without the requirement for a gateway or Internet connection. Thanks to the processing power of Nordic’s nRF52832 SoC, the luminaries can be integrated with a range of sensors for daylight harvesting, occupancy detection, asset tracking, occupancy analytics, climate control, and indoor navigation applications. The SoC’s 64MHz 32-bit Arm® Cortex™ M4F processor is supports the Floating Point (FP) and Digital Signal Processing (DSP) computations typically demanded by high-end wireless mesh networking and IoT applications.

The system is supplied with the option of an ‘Ingy gateway’, which exports performance data from the smart lights so that it can be visualized and reviewed by facility management via a wide range of existing facility and building management portals. 

Nordic’s nRF52832 multiprotocol SoC combines the Arm processor with a 2.4GHz multiprotocol radio (supporting Bluetooth 5, ANT™, and proprietary 2.4GHz RF protocol software), with 512kB Flash memory and 64kB RAM. and

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles