One of the smallest CMOS camera modules available set to broaden automotive applications
With a housing volume of just 7 cc, the CMOS camera is one of the smallest modules suitable for automotive use currently available on the market worldwide. Due to its reduced dimensions, the camera module can be fit in the outer skin of vehicles, for example as a reversing camera into the frame of the rear window or into the side mirror, in order to eradicate blind spots. Not only does this feature increase the safety of cars but also of trucks and buses.
An additional advantage of the CMOS technology lies in its high recording speed, which is important, above all, for active driver assistance systems. Even at a speed of 140 km/h a vehicle moves almost 40 metres per second — a distance in which a lot can happen. The electronic shutter of the RJ642A10000Q module reaches electronic shutter speeds of up to 1/100,000 of a second. The VGA CMOS sensor captures images in the 1/3.7 format with a resolution of 656 x 492 pixels and a viewing angle of 134° horizontally and 104° vertically.
The image data is emitted by the CMOS module in form of an analogue NTSC video signal, which can then be used directly by all common applications inside the vehicle (traffic sign recognition, vision aids for blind spots, lane assistant, parking aids and brake assist systems, amongst others). In spite of its high efficiency, the energy requirement of the camera is extremely modest, with a consumption of less than 100 mA.
The Sharp RJ642A10000Q camera module has a robust design making it suitable for use in cars, buses and trucks. The operating temperature of the camera lies between -40º to 85°C allowing it to work reliably in all climate zones and weather conditions. Impact tests at acceleration speeds of up to 1000 m/s² and vibration tests in the range of 10 to 55 Hz give proof of its mechanical resistance. Lastly, the housing meets the IP 67 standard and reliably protects the inside of the module from dust, dirt and humidity.
Thanks to the robustness and high protection class, the CMOS module is also very suitable for certain applications in the field of inspection and safety technology. Noteworthy examples include systems for controlling and monitoring of cavities which are difficult to access, such as water and sewer pipes or underground tanks.
A summary of key specifications includes an electronic shutter speed of 1/30 th to 1/100000 th of a second, a 1/3.7 CMOS sensor, minimal ambient light requirement of 1.8 lux, a supply voltage of 5 to 6.5 V, NTSC output signal, VGA (656 x 492 pixel) resolution, and dimensions of 19.0 x 19.0 x 19.5 mm without connection cable, and operating temperature range of -40 to 85 °C with protection class rating of IP 67.
For further information: www.sharpsme.com.