Optical monitoring boxes for permanent network control
The optical monitoring box is used to split a fibre optic port into two ports: on the reverse side of the box the monitored fibre optic line is "guided through". In the box, all the fibres are split. Therefore, the additional ports can be connected to monitoring devices that allow a passive monitoring of the network traffic. The box supports the monitoring of 12 LC duplex ports on a half rack unit (U) at data transmission speeds of 10 Gigabit per second. tde’s optical monitoring boxes offer a very good optical performance, so that the available loss budget will not be unnecessarily burdened. There are multimode and singlemode versions available and even the combination of both transmission media in a box is possible upon request. As a standard connector the LC-duplex is used but other connectors can be implemented on demand. Due to the usage of MPO/MTP multi-fiber connectors for instance, a port density of up to 24 duplex ports can be realized.
Visit trans data elektronik at www.tde.de
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
