Osram’s integrated optical sensor for fitness products, in distribution

Osram’s integrated optical sensor for fitness products, in distribution

New Products |
By eeNews Europe

The SFH 7050 sensor has three built-in emitters with different wavelengths of 530 nm (green), 660 nm (red) and 940 nm (infrared). Each of them is based on efficient thin-film chip technology with narrow spectral bandwidths of around 30 nm. This helps save power and also offers high signal quality for reliable measurements. The red LED has a specified wavelength tolerance of only ±3 nm, which guarantees precise measurements. The emitters enable the pulse at the wrist or fingertip and the oxygen in the blood at the fingertip to be measured. They can be controlled individually so the sensor can be used for different applications. Green light is used for measuring the pulse at the wrist, red or infrared emitters are generally used for measuring the pulse at the finger as they can then also measure the oxygen content of the blood.

The photodiode integrated in the sensor (4.7 x 2.5 x 0.9 mm) has an active surface of 1.3 x 1.3 mm, making it very sensitive to light, and enables an extremely compact component to be produced. It has high linearity and signal-to-noise ratio. The infrared LED can also be used in combination with the photodiode as a proximity sensor to start or stop a measurement automatically as soon as the sensor touches or is removed from the skin. Its integrated optical barrier prevents crosstalk from the three LEDs to the photodiode and therefore corruption of the optical signal or the entire measurement.


If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles