Outdoor LED drivers offer surge/burst resistance of 10-kV
The drivers for luminaire installation offer surge/burst resistance of 10 kV and are durable with a lifespan of 100,000 hours.
The drivers are housed in a fully encapsulated enclosure and are suitable for use in harsh ambient conditions outdoors, providing reliable, flexible and cost-effective lighting with a high level of efficiency. There are five different versions with different outputs and variable output currents.
All the versions are equipped with one4all (DALI DT6, DSI, corridorFUNCTION) and ready2mains/U6Me2 (chronoSTEP 2) interfaces. The drivers have the flexibility to meet different lighting requirements. Luminaires can be easily configured via the power cable with the aid of the ready2mains programmer so there is no need for an additional communications interface.
During production the ready2mains enables output currents to be set and tested, and dimming commands to be defined. Integration in automated test processes is also possible. Outdoors, ready2mains can be used to program individual LED street lights, or entire street runs can be programmed from the switching cabinet via the U6Me2 communication protocol with a high degree of flexibility. The chronoSTEP 2 function, which is also known as virtual midnight, offers additional energy savings. It takes into account reduced traffic on the streets at certain times during the night and enables the lighting to be programmed in eight individual dimming levels and times.
In accordance with their intended use outdoors, the drivers operate reliably in an extended temperature range from -40 to +70°C. Standby mode is economical with a power draw of less than 0.16 W.