Paper-based thermometer wraps around objects: monitors temperature on all sides
Publishing their results in the ACS Sensors journal under the title “Ultrafast Paper Thermometers Based on a Green Sensing Ink”, they detail a very simple implementation where they leverage the benefits of paper as a flexible substrate and the ionic liquid, 1-ethyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide ([EMIm][Tf2N]) for its non-volatile and hydrophobic nature.
Transferred to regular A4 paper by pen writing or inkjet printing, the ionic liquid holds onto the paper through the capillary effect, showing no leakage during bending and folding. The electrical conductivity of the ink trace is measured between two sputtered gold electrodes (5mm wide and 1.5cm long in the experiment) connected to an external power supply. It happens to be ultrasensitive to external temperature changes and provides reliable temperature readings despite numerous folding and bending cycles. “The paper thermometer’s response time against thermal heating is about 8 seconds”, report the researchers, “regardless of the difference of conductivity change at different testing temperatures.”
The researchers then pushed the new thermistor concept to another level, patterning eight parallel gold electrodes on one side of a A4 paper, manually writing 64 dots of ionic liquid on the other side of the paper, aligned with the electrodes (so the ink would reach the gold electrodes through the paper) and depositing another set of eight parallel gold electrodes crossing over the dots, perpendicular to the electrodes from the opposite side.
Doing so, they realized an 8×8 temperature sensing array capable of outputting a thermal map of temperature distribution across the paper. To validate their thermal mapping experiments, the researchers used an infrared camera. They highlighted that the paper-based temperature sensing array proved to be very versatile, as it could simultaneously detect the temperature of curved surfaces. The paper can be folded to surround an object and measure the temperature on all of its sides, unlike a direct view reading from a thermal camera.
To prove the scalability of the design, the ionic ink was used with an inkjet printer to print task-specific patterns on large areas. Patents have been secured about this new approach to mass-manufacturing cheap, foldable and disposable real-time thermometers.
Visit the Renmin University of China at www.ruc.edu.cn/en