Passive cooling modules focus on indoor LED applications
The modules are suitable for 50 W LEDs.
Sunon has developed the product line of LED passive cooling modules with five different standard product references. The line features two diameter sizes (90 and 99 mm) and two different heights (110 and 160 mm).
Sunon engineers have used a heat pipe solution, which is much lighter than aluminum extrusion, the conventional passive cooling solution. Heat pipe thermal conductivity is also much better than aluminum, offering much better cooling efficiency.
The base material of the cooling modules is comprised of a combination of aluminum and copper while aluminum forms the finishing material; the modules have a weight range of 195 to 290 g. Customized solutions to fit specific client requirements are also possible with a prototype lead time taking just two weeks and a mere eight weeks for mass production.
Sunon’s LED passive cooling module is easy to install because there is no motor which also makes the system is light-weight for installation. Although customers traditionally mount LED Chip on the cooling module base, Sunon is able to make additional mounting holes or make the proposal based on customer’s system fixing specifications on the CM base area if required and further simplify the installation process.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
