PCB terminal block for SPE Single Pair Ethernet
Cette publication existe aussi en Français
Phoenix Contact has launched a range of PCB terminal blocks for single pair Ethernet running both data and power.
The Screw and Push-in SPE terminal blocks in the Phoenix Contact Combicon range are available with a pitch from 3.5mm to 5.08mm with 0.14 mm² to 2.5 mm² (26 AWG to 12 AWG) conductors as well as 0°, 45°, and 90° directions for design flexibility.
Single Pair Ethernet (SPE) is a key technology for Industry 4.0 and IIoT applications for simpler connections with both data and power over a single cable, particularly for sensors.
- Single Pair Ethernet cables for building and industrial designs
- Single Pair Ethernet family targets the Industrial IoT
- Learning connector lessons with single pair Ethernet
In addition integrating an IP-protected connector into such field devices, there is also the option of using a cable gland to achieve the desired degree of protection. This means that the PCB terminal blocks, tested and suitable for SPE data transmission, can be used inside the devices.
This has a range of advantages. On the one hand, a device manufacturer can decide upon the position of the small SPE terminal blocks on the PCB precisely as needed. The familiar screw or Push-in connection technology also makes life easier for the on-site installers. With the clear colour coding and intuitive handling, the blue and white wires of the SPE cable can be contacted clearly and safely.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
