Photoelectric sensor detects clear objects with a response speed of 250 microseconds
The Q26 comes as a compact cubic unit with 20 mm mounting hole spacing, enabling quick installation in tight locations. Additionally, the sensor’s coaxial optics permit operation over a wide range of distances with the reflector mounted as close as 5 mm for applications with restricted spaces. The Q26 includes a LO/DO switch to control the output type, and a single turn potentiometer to adjust detection sensitivity. Equipped with a Health Mode output for application monitoring, the Q26 communicates operation and connection status—allowing the user to ensure reliable sensor performance. The sensor operates on 12-30V dc with a response speed of 250 microseconds. The sensor is also protected against damage from potential mis-wiring during installation and transient voltage spikes during operation.
Visit Banner Engineering at www.bannerengineering.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
