Photorelays slash power consumption in battery-powered equipment
The photorelays feature a low trigger LED current of 1mA, which reduces input side power loss by increasing the sensitivity of the photodiode array. Using these photorelays for on/off control in battery-powered security devices and various sensors, contributes to lower power consumption and longer operating life.
TLP170AM has a rated off-state output terminal voltage (Voff) of 60V. It features a typ. on-state resistance (Ron) of 0.15Ω and constant on-state current (Ion) of 0.7A, with pulse operation of up to 2.1A. The TLP170GM is a 350V version with a typ. Ron of 28Ω, and Ion of 110mA constant current and 330mA pulse operation. Both devices have a rated operating temperature between -40°C and 85°C, to allow for a temperature margin in system-level thermal design.
The 4-pin SO6 package enables a minimum isolation voltage of 3750Vrms, allowing the devices to be used in equipment requiring high insulation performance.
More information: TLP170AM, TLP170GM
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
