Plastic MEMS promises pervasive ultrasound imaging

Plastic MEMS promises pervasive ultrasound imaging

Technology News |
By eeNews Europe

Detailing their findings in a paper titled “Fabrication and testing of polymer-based capacitive micromachined ultrasound transducers for medical imaging” published in the Microsystems & Nanoengineering journal, the researchers explain how they were able to use inexpensive materials, such as the SU-8 photopolymer and Omnicoat, to create thin yet very sensitive arrays of ultrasound transducers whose imaging capabilities where on part with silicon-based designs.

A 64-element polyCMUT linear array mounted on PCB.
b) Six CMUT elements separated by a pitch of 550μm.
c) CMUT cells showing the interconnected top
electrodes and cavities underneath.

In just six steps and for an estimated unit cost under 100 dollars, they manufactured micrometre-thin biocompatible parylene-sealed polymer CMUTs (polyCMUTs). Their device was built as a linear array of 64 CMUT elements, each containing 4×75 CMUT cells (the actual plastic MEMS), with a pitch of 550μm between elements. The linear array allowed the researchers to experiment with beamforming techniques for accurate ultrasound imaging.

Key to making these polyCMUTs was the encapsulation of the metal electrode inside the membrane, instead of being on top, allowing for a thin stack and low operational voltages comparable to traditional CMUTs fabricated in polysilicon or silicon nitride. In their paper, the researchers report that the polyCMUTs could be pre-biased so as to be operated even as passive devices during reception and with low excitation voltages (a 12 VAC signal superimposed on a 10 VDC signal) during ultrasound transmission.

UBC researcher Carlos Gerardo shows the new
ultrasound transducer.
Credit: Clare Kiernan, University of British Columbia.

Another interesting point is that maximum process temperatures didn’t exceed 150°C, meaning these polyCMUTs could be fabricated directly on top of silicon-based electronics such as beam formers and Tx/Rx switches. The researchers anticipate such ultrasound transceivers could be integrated into flexible substrates for conformal and wearable health monitoring systems

“You could miniaturize these transducers and use them to look inside your arteries and veins. You could stick them on your chest and do live continuous monitoring of your heart in your daily life. It opens up so many different possibilities,” commented Robert Rohling, professor of electrical and computer engineering at University of British Columbia and co-author of the paper.

University of British Columbia –


Related articles:

How about plastic MEMS?

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles