PoE connectors reach 100W with 10G data
Bel Fuse has expanded its single port, 10G, NBase-T power over Ethernet (PoE) integrated connector modules (ICMs) to 60W and 100W.
The MagJack PoE ICMs are aimed at industrial controllers, video cameras, Wi-Fi access points, or any applications requiring a single port Ethernet connector. This allows designers to implement PoE while increasing their speed to 10G, ten times of the standard Gigabit Ethernet (GbE).
The MagJack modules can send or receive 0 to 60W or 0 to 100W of power per port over all four pairs within the Ethernet cable while maintaining the bandwidth of the NBASE-T compliant 10GbE signals, meeting the latest IEEE 802.3 electrical standard requirements and common mode parameters.
The modules can carry 600mA or 1000mA of current and 37.0 – 57.0 VDC continuously, operating in a temperature range of -40⁰C to 85⁰C depending on the model.
- J-Link adds PoE for test farms
- Blog: The value of Power-over-Ethernet (PoE)
- PoE switch adds network/security features for outdoor use
The ICMs can be used as either a PSE (Power Source Equipment) or a PD (Powered Device) and are designed to support all Marvell’s PHYs including MV-CUX3610.
The latest products are backward compatible to slower speeds and lower powers as needed and use industry standard footprints and pin-outs, including 50 micro-inches of gold-plated contacts as required by the FCC with EMI-spring tabs on the shield for enhanced EMI and ESD performance.
The modules are available in many different LED colour combinations, the ICMs are 100% high-potential tested, lead-free, wave-solder compatible, RoHS 6/6 compliant, UL recognized, and feature a RJ45 plug-tab up for ease of use.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
