MENU

Power converter chip targets wearables

Power converter chip targets wearables

New Products |
By Rich Pell



The device has a load current capability of 150 mA with an ultra-low quiescent current of 1 µA. The AS1313 is optimized for light loads and with efficiencies of up to 95%.

In order to save power it features a shutdown mode, where it draws less than 100 nA. In shutdown mode the battery is not connected to the output. In light load operation, the device enters an idle mode when most of the internal operating blocks are turned off in order to save power. This mode is active approximately 100 μsec after a current pulse provided that the output is in regulation. The AS1313 is available in a 8-pin (2×2) MLPD and a 0.4 mm pitch 6-pin WL-CSP package.

Parameters include;

Input voltage 2.4 to 5.5V

Output voltage 1.2 to 3.6V

Output current 50 mA

Efficiency 96%

Iq 1µA

Architecture Hysteretic, async

fmax <500kHz

An evaluation board (pictured) is available.

ams; https://ams.com/eng/Products/Power-Management/DC-DC-Buck-Converters/AS1313

 

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s