Power dividers for wireless and defense applications
The AM10000PD1237 is a six-way power divider that covers 2 to 18 GHz and handles 30 W CW, making it an excellent choice for a wide array of defense applications. It has insertion loss of less than 2.5 dB, isolation of at least 15 dB, amplitude balance of 0.8 dB, and phase balance of 10 degrees or better. The power divider’s maximum input and output VSWR is less than 2:1 and it uses SMA female connectors and measures 4.0 x 6.0 x 0.4 inches.
The AM100PD1083 is a three-way power divider that operates from 1 to 200 MHz and has isolation of 20 dB, insertion loss of less than 0.5 dB, and maximum VSWR of 1.3:1. Amplitude balance is better than 0.2 dB and phase balance is 2 degrees. The power divider is available with SMA female, TNC female, or Type-N female connectors, measures 1.25 x 1.25 x 0.75 inches, and has an operating temperature range of -40 to +60°C.
The AM1650PD873 is a broadband four-way power divider that operates from 800 to 2500 MHz and handles 300 W CW. Its low IMD of -150 dBc or better makes it well suited for wireless base station and other applications in which very low distortion is critical. The power divider has insertion loss of less than 6.3 dB, isolation of at least 17 dB, and input and output VSWR of less than 1.25:1. The power divider uses SMA female connectors, measures 1.25 x 1.25 x 0.75 inches, and has an operating temperature range of -30 to +60°C.
The AM252PD888 two-way power divider operates from 5 to 500 MHz with very low insertion loss of 0.8 dB or less, isolation of at least 18 dB, amplitude balance 0.5 dB, phase balance 5 degrees, maximum VSWR of 1.4:1, and power handling ability of 50 W. It uses Type-N female connectors, operates over a temperature range of -40 to +70°C, and measures 2.1 x 2.1 x 1 inches.
For further information: www.AMCrf.com.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
