Power meter for EMC testing of wireless links according to the latest ETSI directive
New complex test methods for measuring output power are specified which are significantly different; they include duty cycle, transmitter sequence, transmitter gap and a completely new concept ‘medium utilization’. New measurement instruments are needed to carry out the latest mandatory tests.
ETS-Lindgren is introducing a new power meter to enable pulse power testing to this rigorous new standard. The USB RF Power Sensor, model 7002-006 covers a frequency range from 9 kHz to 6 GHz, the key parameter is an exceptionally fast sampling rate of 5 Ms/s which is essential for the new tests. A significant feature is the trigger input/output on the probe for synchronous triggering of multiple EMPower meters for power measurements on MIMO (multiple-input and multiple-output) devices.
The sensor’s USB connector provides easy and direct connection to a PC to enable ETSI 300 328 power measurements to be performed on MIMO devices in conjunction with test software. The software, supplied at no charge, automates and simplifies simultaneously triggered ETSI 300 328 MIMO power tests when used in conjunction with the new sensor.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
