MENU

PowerHap evaluation kits for haptic feedback

PowerHap evaluation kits for haptic feedback

By eeNews Europe



BOS1901-Kit haptic development kit includes three 60 V actuators and has an ordering code of Z63000Z2910Z1Z44. The board is based on the CapDrive driver architecture from Boréas Technologies, a partner of TDK Electronics. The BOS1901 driver features small dimensions, low current consumption and fast response times.

The second evaluation kit is suitable for both 60 V PowerHap types and 120 V types. The device has available in two versions: A driver for one actuator (Z63000Z2910Z1Z1), and driver for up to five actuators (Z63000Z2910Z1Z7). These kits likewise contain three types of PowerHap actuators.

Both haptic kits feature a USB interface and offer setting options with regard to voltage amplitude, frequency, pulse repetition rate, signal shape and sensor functionality.

More information

www.tdk-electronics.tdk.com/en/powerhap

Related news

Universal RFID reader integrates NFC and BLE technologies

Mouser stocking Cypress PSoC 6 BLE prototyping kit

New NFC Universal Device adds features and simplifies EMVCo 3.0 compliance

IoTMark benchmark available for BLE edge nodes

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

10s