Powersolve releases PP3 equivalent primary and rechargeable lithium batteries
G600 Series batteries are reusable alternatives to standard PP3 format alkaline batteries. They have a rated capacity of 600 mAh and feature a standard charge cycle of four hours. These G600 batteries do not suffer from memory effect and come with a protective circuit module (PCM) which protects against over-charging, over-discharging and over current. They are fully safety tested for impact, crushing, short circuit and piercing and operate between -20 and +60ºC. Powersolve can also supply chargers.
With a nominal capacity of 1200 mAh, CP9V batteries feature a maximum continuous current of 400 mA, a maximum pulse current of 800 mA and a self-discharge rate of less than 2% per annum @ 30ºC. Housed in an ABS case weighing just 33 grams, these batteries operate at temperatures up to +60ºC.
According to Powersolve’s Managing Director Peter Clark, versions can be manufactured to customer specific dimensions depending on quantities.
Visit Powersolve at www.powersolve.co.uk
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
