Programmable Ethernet to CAN/CAN FD interface
The Kvaser DIN Rail SE400S-X10 has four CAN/CAN FD channels and supports up to four, optional Kvaser DIN Rail SE400S-X10 I/O add-on modules; analog, digital and relay. Well suited for automotive test cell and end-of-line production test applications, the SE400S-X10 FD can be programmed with diagnostics routines to test automotive body control modules, for example.
The Ethernet to CAN/CAN FD SE400S-X10 base module and I/O share the same mounting system, ensuring that installation requires no tools. The I/O modules communicate with the SE400S-X10 using an optical bus, eliminating the need for connecting cables and making the addition or removal of I/O the simplest of operations. The I/O can be controlled either from Kvaser’s standard API, within Kvaser CANlib SDK (over Ethernet), or directly from the master unit using Kvaser t programs.
A simple t program (C-like code, of which plenty of examples can be found within Kvaser CANlib) transforms the Kvaser DIN Rail SE400S-X10 into a gateway or bridge between up to four CAN networks. When used as a bridge, the Kvaser DIN Rail SE400S-X10 can filter out certain messages and, if needed, inject faults or modify signal values.
Kvaser – www.kvaser.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
