Push button reboot controller draws 0.01μA in standby
The quiescent current in the standby state is a very small 0.01uA, which contributes to a longer battery drive time. On internally-fixed reboot delay time products, external components such as capacitors and resistors are not necessary, and this allows a smaller mounting area.
Operating from 1.75V to 6.0V, the XC6190 series are timer reset ICs that supply a reboot signal to the system when “L” voltage is input into both the SW1 pin and the SW2 pin for the required time (reboot delay time) using two switches (physical buttons).
On the A type, the reboot delay time (TDL) can be set within the interval 1s to 20s by changing the external resistance RT. On the B type, TDL is fixed internally, and is 12.5s when the TS pin is at “H” level or 7.5s when the TS pin is at “L” level. The reboot signal (TRSTB) is output for 0.4s (TYP.), and then automatically returns to the regular state. The chip comes in the USPN-6 and USPN-6B01 packages, with UVLO protection to prevent malfunctioning of the IC.
Visit Torex Semiconductor at www.torex.co.jp/english/
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
