Q-DAS plugin simplifies transfer of measurement and test data
The Q-DAS plug-in provides the Q-DAS system with the measured data of the EyeVision software in an ASCII-transfer format which enables the production process to be automatically monitored statistically.
Owing to the use of automated measuring systems such as e.g. a measurement station equipped with an EyeCheck smart camera with its integrated EyeVision software, the amount of the inspection data, which has to be evaluated and processed, increases. Another special task is to filter the measurement data to find the crucial data and intervene at an early stage of the production. The Q-DAS plug-in can transfer the monitored inspection data automatically for evaluation and the data can be compared to the specifications of the process.
The Q-DAS plug-in of EyeVision 3 not only makes the data evaluation easy, but also saves power and other resources such as hardware and maintenance requirements. In the past special adapters in the control cabinet or interface boards in the PC were necessary to network the control. Most plants are equipped with Ethernet interfaces which makes it easier to collect the measurement values and additional data.
The Q-DAS plug-in for EyeVision 3 aims to make data processing easier for users working with large amounts of data.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
