Releasable poke-in connectors for LED lighting

Releasable poke-in connectors for LED lighting

New Products |
By eeNews Europe

With their easy-to-use poke-in and wire release features, the new connectors help shorten installation times and provide extra flexibility for reuse and wire replacement. No crimping or soldering is needed when attaching wires; once inserted, wires are strongly retained and will not inadvertently pull out. A robust integral release feature allows rework, if required. The reduced profile of these connectors takes only 2mm in height above the PCB top surface while horizontal wire insertion minimizes space usage beneath the PCB. The Buchanan WireMate ITB wire-to-board connectors have a maximum voltage rating of 320V and a current rating of 6A (for 18AWG wiring) or 5A (20 and 22AWG). They are molded in a high-temperature-resistant nylon (PPA) casing that withstands high temperature SMT soldering temperatures.

TE Connectivity –

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles