MENU

RFIC platform has a range of up to 15 km for M2M applications

RFIC platform has a range of up to 15 km for M2M applications

New Products |
By eeNews Europe



In comparison, the maximum distance today of a smart meter transceiver in Europe using FSK modulation is between one and two kilometers. The additional range provided by LoRa will eliminate the need for repeaters in these applications, significantly simplifying the system design and lowering the total cost of deployment. The range extension provided by LoRa also makes the device suitable for emerging smart city, Internet of things (IOT) and machine-to-machine (M2M) applications.

The SX1272 achieves receiver sensitivity up to -137 dBm using a low-cost crystal. This compares to today’s state-of-the-art FSK devices that can achieve sensitivity of -115 dBm with a comparable crystal or -125 using an expensive temperature controlled crystal oscillator (TCXO). Additionally, the SX1272 has a 25 dB improvement over FSK devices for rejecting in-band interfering signals. The SX1272 supports GFSK, FSK, GMSK, and OOK modulation in addition to LoRa and is designed to support WMBus, IEEE 802.15.4g (SUN), FCC 15.247, ARIB T96/108, EN 300-220 as well as other worldwide standards and regulations.

Operating from a 1.8 to 3.7 V supply range, the SX1272 draws 9.7 or 10.8 mA for the receiver, 28 mA for the transceiver at +13 dBm, and has a sleep current of 100 nA. It supports bit rates up to 300 kbps.

www.semtech.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s