Right angle solder cup headers ease wire to board connections
The new 380-10-1XX-10-003000 right angle headers are suitable for situations where space is limited, and wires cannot be easily manipulated. The solder cups are uniformly aligned to facilitate efficient soldering, especially useful for terminating cables, and can accept up to 22 AWG stranded wire. Rotation limiting features built into the insulator and pins keep solder cups and right-angle tails in place during soldering and termination processes. These are single row connectors with 2,54mm pin spacing and 0,51mm diameter tails suitable for mating with a variety of sockets or terminating directly to a P.C.B. They deliver an above-board profile of 2,54mm when soldered directly to the circuit board and when mated with Mill-Max low-profile board mounted sockets 315-XX-1XX-41-003000 a total interconnect height of 4,45mm is achieved. The insulator material is high temperature PCT polyester with an HDT of 230° C to withstand most soldering processes. The solder cup pins are precision turned from brass alloy and are plated with 10 u” gold providing interconnect reliability, corrosion protection and wear resistance. Connectors are available from 1-64 positions.
Mill-Max – www.mill-max.com/PR687
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
