Robust and compact WLAN access points target transport applications
With the assistance of the access point, multiple mobile WLAN compatible devices in a passenger train, bus or subway have the possibility to communicate with the Internet or access local data, such as time table information, videos, etc. A configurable firewall protects the individual users’ personal data against unauthorized access and supports secure and interruption free data exchanges with the Internet. Thanks to a highly convenient and intuitive user interface, the CyBox AP can be configured quickly and easily. Not only is it possible to set up global parameters; the device also allows for the complete configuration of the WLAN interfaces, including channel selection, SSID, encryption, or firewall settings.
It is also possible to upload or back up existing configurations. The sturdy aluminium housing which complies with IP30 supports fan-free operation at temperatures ranging from -40 to +70°C (EN50155, Class T2). The device is also designed to withstand shocks and vibrations in compliance with applicable DIN, EN and IEC industry standards. Thanks to two GB Ethernet ports (via M12 connectors), redundant connections with a local server, or daisy chaining with other access points can be readily accomplished. The two ports are internally connected to a GB Ethernet switch (unmanaged). The switch works autonomously from the CPU of the access point (which is a QorlQ 1011 SoC in this case). With multiple CyBox APs switched in series, participants can communicate without any problems even if individual access points are turned off. The voltage supply for the CyBox AP can be connected to a local 24 V DC supply. The input meets all EN50155 requirements and tolerates voltages ranging from 12 V to 36 V.
Optionally, the new access point can also tolerate voltage supply interruptions lasting up to 10 ms, which renders it compatible with EN50155, Class S2. As an additional voltage supply option, CyBox AP offers a PoE input (in compliance with IEEE802.3at) for a Class 4 supply. One of the unique functional properties is the possibility to supply a second CyBox AP with power through PoE using a connection on the downlink port. This structure enables expanded radio transmission with two access points, which requires only one CAT-X cable. This is a cost cutting feature, especially for retrofitting or conversion projects. The CyBox AP weighs only about 1 kg for a 105×54.12×164 mm form factor, it has a maximum power rating of 20W. Up to a maximum of 6 antennae can be connected using SMA plugs.
Visit Eltec Elektronik at www.eltec.de
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
