ROHM Semiconductor claims industry’s first multi-touch controller for resistive touchscreens
The increasing functionality and sophistication of electronic devices drives the demand for touchscreens which are preferred for their ease of use and versatility. In addition they enable direct interaction without the need for input devices. Resistive touchscreens account for more than 75% of the touchscreen market, due in large part to their lower cost and higher precision when compared to capacitive technologies. Another advantage is that they allow operation with fingernails or even while wearing gloves, unlike capacitive touchscreens that require a conductor or dielectric.
The functionality of electronic devices is increasing day by day and operation by touch panel is increasingly shifting toward pinch, spread and other intuitive finger gestures. Until now, in order to actualize functions like these, electrostatic capacitance type touchscreens were the only choice. With the new BU21023/BU21024 series, conventional 4-wire resistive touchscreen designs can be easily expanded to include dual-touch.
The BU21023/BU21024 series ICs integrate a dedicated analog circuit and CPU for precise two-point coordinate and gesture detection. A calibration function is also built-in that minimizes the effects of panel variations during production as well as fluctuations in touchscreen device characteristics caused by temperature variations or time-based degradation.
Samples of the BU21023/BU21024 series of resistive touchscreen controllers are available now.
Visit ROHM Semiconductor at www.rohm.com/eu.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
