This 19" VME64x 9U high system is fitted with a 12-slot VME64x backplane with rear I/O as standard. It is however possible to modify the design by integrating backplanes with different numbers of slots or other technologies such as VPX, VXS or CompactPCI. Forced air cooling from front to rear is achieved using a variable speed, temperature-controlled cooling fan.
The fan unit is easy to maintain or replace from the front should the necessity arise. Up to four 24 V DC power supply units can be inserted into the system from the front to provide the required power rating. To achieve still better torsional stiffness, the system is equipped with a newly developed horizontal rail with three-hole fixing, which achieves a stiffness of some 65% greater than that compared with rails with two-hole mounting.
The components are secured in place with stainless steel bolts treated with thread-locking compound to prevent them working loose as a result of vibration. In addition to the standard guide rails, the system can also be fitted with guides to accept Card-Loks, Wedge-Loks or clamshells. Conforming to the usual IEC and IEEE specifications, the 19" Titan COTS VME64x system also satisfies the MIL-STD- 810F (shock resistance 10 g; 30 ms), MIL-STD -167 (vibration resistance) and MIL-STD- 461 (EMC compliance) standards.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.