Rugged 6W and 10W DC-DC converter modules with chassis and DIN rail mounting

New Products |
By Nick Flaherty

The latest two DC-DC converter families from Minmax Technology supports loads of up to 6W or 10W and equipped for chassis or DIN rail mounting for industrial, railway, renewable energy and medical applications.

The 6W MJWI06C and 10W MKWI10C encapsulated DC-DC converter modules are suitable for use on a 24V or 48V power bus to provide a stand-alone power supply solution which does not need to be integrated into a circuit board design in industrial or communications equipment. These supply a regulated voltage to circuits in server racks, data cabinets, and outdoor telecoms equipment such as base transmitter stations.

The rugged DC-DC converter modules handle harsh operating conditions, including an ambient temperature range of -40°C to +92.5°C, and provide I/O isolation of 3kV DC.

“These fill a gap in the market for chassis or DIN rail-mount modules which are suitable for low-power applications for regulated power outputs of <10W without the need to design and assemble a board-mount power supply,” said Achun Tsai, Global Sales Manager of MINMAX.

Both series of modules are available in versions with a fixed output voltage of 5V, 5.1V, 12V, 15V, 24V, 48V, ±12V, ±15V or ±24V DC. They operate from a 4:1 input-voltage range of 9V-36V or 18V-75V DC. Typical efficiency of the new modules when supplying the maximum load is up to 86%.

A stable feedback loop avoids oscillation in no-load and light-load conditions. The modules have no minimum load requirement.

The MJWI06C and MKWI10C are approved to EN 55032 Class A and FCC Level A. For electromagnetic immunity, they are approved to EN 61000-4-2, -3, -4, -5, -6 and -8.

System protection features include under-voltage, overload and short-circuit protection. The DC-DC converter modules are validated for worldwide safety compliance under the Certification Bodies (CB) scheme.


Linked Articles