Sensor interface lifts resolution in medical, industrial & security CT scans

Sensor interface lifts resolution in medical, industrial & security CT scans

New Products |
By Graham Prophet

A current-to-digital converter for use in Computed Tomography (CT) scanners, it offers ultra-low noise, very high resolution and excellent linearity. Its analogue performance will enable new scanners to produce sharper, more detailed images. Medical CT scanners equipped with the AS5900 will feature an improved X-ray detector module, and will help physicians to produce more accurate diagnoses while subjecting patients to lower doses of radiation.


The AS5900 detector interface chip for CT X-ray scanners features;

– Ultra-low noise: As few as 3,200 electrons for a full-scale range at an input current of 1 µA and 30 pF input capacitance. The circuit’s very high signal-to-noise ratio allows the flexible use of any pixel size, enabling it to digitize extremely low-current outputs from the latest high-sensitivity photodiodes. As a result, the CT scanner can render more detailed images. Low noise allows CT equipment to maintain high spatial resolution while reducing the X-ray dose to which the patient is exposed.

– Very low power dissipation: Power dissipation as low as 1 mW per channel reduces the requirement for cooling capability in the CT scanner, lowering the overall system cost.

– High resolution: The 26-bit sigma delta ADC integrated in the AS5900 produces a richer grey-scale palette for sharper and more detailed images.

– High linearity: ±250 ppm of Read inputs (±1 ppm of full-scale range) to give improved contrast, accurately rendering slight variations in image brightness.

The new ams detector chip provides detailed motion-free medical images while operating at very high acquisition rates: the adjustable integration time can be set as low as 50 µsec.

The configurable design of the AS5900 gives it the flexibility required for integration into different types of end equipment that use a multiple-slice photodiode array. The chip is suitable for use not only in medical equipment, but also in industrial and security CT scanners. Equipment designers can configure or adjust:

– gain setting, to configure the input-current full-scale range and the noise floor

– power modes, to adapt power consumption to the detector requirements

– clock frequency, to balance the resolution with the required integration time


The AS5900 integrates all the functions of a current-input ADC to minimize the requirement for external components. It includes an internal reference voltage and temperature sensor. The AS5900 also provides a standard LVDS interface to a host FPGA, running at a data rate of up to 80 Mb/sec for optimized power consumption.


The AS5900 comes in a 10 x 10 mm BGA package for $128.00 (1,000) units. An evaluation board is available.





If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles