Side-entry, 6-pin SIM card connector in a 32.4×16.4×2.35mm housing

Side-entry, 6-pin SIM card connector in a 32.4×16.4×2.35mm housing

New Products |
By eeNews Europe

The extremely compact connector design, with a length of 32.4 mm (including the SMT solder tabs), a width of 16.4 mm, and a low-profile overall height of just 2.35 mm, was achieved using insert molding production technology (employing molded contacts). An integrated switch ensures reliable card detection, and four side-mounted SMT solder tabs provide an additional basis for sturdy anchoring on the PCB. The service life of this robust card connector, which is completely enclosed, is specified at 5,000 mating cycles. Additional technical features include the operating temperature range from –40 to +105 °C, the maximum initial contact resistance (for the plug contact) of 40 mΩ, an insulation resistance of 1000 MΩ and a dielectric strength of up to 500 V AC for one minute. This card connector is configured for voltages of 50.0 V DC at a maximum of 1.0 A per pin. These side-entry SIM card connectors are suitable for use with automatic pick-and-place systems. They are supplied in tape-and-reel packaging in volumes beginning at a minimum order of 80,000 pieces.

Visit Suyin at

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles